Olympus SZX10 - Assembly Instructions; Assembly Diagram

19
SZX10
8 Assembly
8-1 Assembly Diagram
The diagram below shows how to assemble the various modules. The numbers indicate the order of assembly.
When assembling the microscope, make sure that all parts are free of dust and dirt, and avoid
scratching any part.
NOTE
Standard base
SZX2-ST
Zoom microscope body
SZX2-ZB10
Eyepieces
WHSZ series
Observation tube
SZX-BI30/BI45
SZX2-TR30/TR30PT
SZX2-TTR/TTRPT
Specimen holder
S-CL
Objective
Objective series
for SZX10
Focusing assembly
SZX2-FOF
SZX2-FO
SZX2-FOFH
Intermediate
attachment
SZX-EPA
SZX2-ILLC10
etc.
Stage plate
Pillar
(Provided with the SZX2-ST)
11
8
7
2
3
4
5
6
Allen screwdriver storage hole*
Allen screwdriver*
(provided with the zoom
microscope body)
Allen wrench**
(provided with the standard
base and focusing assembly)
Required tools
* The Allen screwdriver can be stored in the
pillar.
** Do not use the Allen wrench for a purpose
other than installing the pillar and the zoom
microscope body.
Downloaded from ManualsNet.com search engine