Olympus SZX10 - Operation of Other Modules; Eyepoint Adjuster SZX-EPA

23
SZX10
9-1 Eyepoint Adjuster SZX-EPA
2
Assembly
1
External View
a
b
Using the Allen screwdriver provided with the SZX2 microscope body,
remove the observation tube
a
.
Mount the eyepoint adjuster
b
to the place where the observation
tube has been mounted.
Mount the observation tube (removed in step 1 above) onto the
eyepoint adjuster.
1
2
3
9 Operation Of Other Modules
This module increases the eye point height by 40 mm.
Up to two eyepoint adjusters can be mounted, provided that no other intermediate attachment is used.
TIP
Observation tube clamping screw
Downloaded from ManualsNet.com search engine