Olympus SZX10 - Gliding Stage SZH-SG

32
9-7 Gliding stage SZH-SG
· Be sure to clean the sliding surface if dirt or metallic power is attached on them.
· Do not place the gliding stage on the friction surface directly on the desktop.
STAD mount for ILLT SZX2-STADM is necessary for using the SZX2-ILLTQ/ILLTS LED transmitted light
illumination base. For details, refer to the instruction manual for the SZX2-ILLTQ/ILLTS LED.
Stage plate mount hole
Applicable stand
Gliding stage
Stage plate
Use the one provided
with the stand.
Seat
Sliding surface
3
2
1
Stage plate mount hole
NOTE
TIP
1
External view and nomenclature
2
Installation
Gliding stage
Illumination field diameter: 40 mm
Moving range diameter: 40 mm
Stage plate
Gliding stage
Finger hook
Seat
3
Operation
Hold the gliding stage by the edge and move it horizontally.
Clean the sliding surface periodically.
TIP
Downloaded from ManualsNet.com search engine