U-UCD8
2
1. Clean all glass components by wiping gently with gauze. To remove fingerprints or oil smudges, wipe
with gauze slightly moistened with a mixture of ether (70%) and alcohol (30%).
Since solvents such as ether and alcohol are highly flammable, they must be handled carefully. Be
sure to keep these chemicals away from open flames or potential sources of electrical sparks ——
for example, electrical equipment that is being switched on or off. Also remember to always use
these chemicals only in a well-ventilated room.
2. Do not disassemble any part of the attachment as this could result in malfunction or reduced perfor-
mance.
3. The optical elements and index plates which are not used should be stored in a case.
2 Maintenance and Storage
ax7353_inst.pmd 20.04.2005, 12:272
To Next Page
Loading...
