Warnings and Cautions
MOBILE WORKSTATION WM-DP1
7
• Keep open containers of liquid away from electrical equipment used on
the mobile workstation to prevent operator electrical shock and
equipment damage. Do not use the system if liquid has entered the
equipment.
• To minimise risk of injury, it is recommended that heavy items are placed
on the mobile workstation by two people working together. This is
particularly important when placing a monitor on the optional monitor
platform (if fitted). Ensure electrical items used on the mobile
workstation are positioned centrally on the shelves.
• Never place any items on top of a monitor (if fitted) as these may topple
when the mobile workstation is moved.
• Where fitted, the electrical resistance of the conductive antistatic castors
should be tested at regular intervals in accordance with ISO 2878 to
assess antistatic effectiveness.
• Where antistatic castors are fitted, avoid contact of the castor wheels
with oil and avoid a build up of floor cleaning wax and polish as these
will impair the antistatic effectiveness of the castors.
• Store and use the WM-DP1 mobile workstation within the environmental
conditions described in Chapter 8; failure to do so may lead to
equipment malfunction or failure.
• There are no operator-serviceable components on the WM-DP1 mobile
workstation. Refer servicing to qualified service personnel.
• To minimise the risk of injury and/or damage, do not fit accessories other
than those described in Section 1.1 to the WM-DP1 mobile workstation.