Olympus WM-NP2 - Chapter 2 Symbols; Top Tray; Separation Transformer

Symbols
MOBILE WORKSTATION WM-NP2
28
Chapter 3 Symbols
The following symbols are used on the WM-NP2.
3.1 Top tray
Refer to instructions for use
3.2 Separation transformer
Warning to observe rules
regarding the use of multiple
socket-outlets
Potential equalisation terminal
Input Output
Not exceeding
T
a
=40°C
Maximum ambient
temperature
Mains power connected Breaker
Heavy unit Remote switch
Non-inherently short circuit
proof separation
transformer
Class A/B
Insulation temperature rating
of transformer according to
IEC 60085:2004
Unit complies with relevant
European directives
(MAJ-1648 only)
Disposal conditions see
Chapter 11 End of Life
(MAJ-1648 only)
Consult instructions for use
Indicates the unit has been
independently assessed for
compliance with UL and CSA
standards as a Recognized
Component of the workstation
(MAJ-1647 only).