Olympus WM-NP2 - Chapter 4: Preparation for Use; Workstation Setup and Adjustments

Preparation for Use
MOBILE WORKSTATION WM-NP2
30
Chapter 4 Preparation for Use
4.1 Castors
1. The workstation has two diagonally located braked castors. Ensure both brakes are applied
prior to use and released before moving the workstation.
NOTE
Brakes should always be applied when the workstation is not being
manoeuvred.
2. To lock and unlock the castor brake, refer to Figure 4.2.
Figure 4.1
Figure 4.2
Brake castor
Brake castor