Specifications
MOBILE WORKSTATION WM-NP2
63
The Olympus WM-NP2 mobile workstation and separation transformer are manufactured in the UK
by KeyMed (Medical & Industrial Equipment) Ltd.
Classification Standards compliance The separation transformer conforms to the relevant
requirements of : EN IEC 60601-1:2006/UL 60601-1
and CAN/CSA Std. No. C22.2 No. 601.1-M90
Type of protection against
electric shock.
Class I equipment.
Degree of protection against
explosion
None, the Separation transformer should not be used
within the zone of risk of flammable gases
Degree of protection against
ingress of water.
IPX0 as defined in EN IEC 60529:1992, ordinary
equipment.
Mode of operation Continuous
Environmental
conditions
Ambient temperature Storage: -40C to +70C (-40F to +158F)
Operation: 10 40C (50 - 104F)
Atmospheric pressure Storage/Operation: 70-106 kPa (10.15-15.37lbf/in
2
)
Relative humidity 95% maximum @ 40C (104F) non-condensing
Regulatory
status
European Economic Area
(EEA)
End of Life
220-240V units are CE marked in
accordance with Council Directive
93/42/EEC of 14 June 1993, as amended
concerning medical devices, as an accessory to a
medical device, Class I. Year of manufacture is given
in first three digits of serial number.
The year of manufacture is shown on the packaging
label, combined with the ‘MANUFACTURER’ symbol.
In accordance with European Directive
2002/96/EC on Waste Electrical and
Electronic Equipment, this symbol
indicates that the product must not be
disposed of as unsorted municipal waste,
but should be collected separately. Refer
to your local Olympus distributor for return
and/or collection systems available in
your country.
To Next Page
Loading...
Need help?
General
