• Store and use the WM-NP2 mobile workstation within the environmental
conditions described in Chapter 7; failure to do so may lead to
equipment malfunction or failure.
• Before attempting to move the workstation outside the procedure room,
ensure that the endoscope and fluid containers are removed.
• There are no operator-serviceable components on the WM-NP2 mobile
workstation. Refer servicing to qualified service personnel.
• Before commencing shelf adjustment, ensure equipment is
disconnected and removed from the shelf.
• To minimise the risk of injury and/or damage, do not fit accessories other
than those described in Section 1.1 to the WM-NP2 mobile workstation.
• The maximum storage load of each drawer is 5kg, otherwise stability
may be compromised.
• Ensure each drawer is locked when moving the workstation.
• Take care not to trap fingers when opening/closing or repositioning the
drawer unit.
• When installing a keyboard on the keyboard tray, ensure the cable
passes around the outside of the sliding runner, otherwise the cable may
be pinched when operating the sliding tray.
• Check all equipment connectors on a regular basis to ensure there are
no loose connections.
To Next Page
Loading...
