OMCN 3000 - 16.1 IDENTIFICATION DATA; 16.2 OWNERSHIP TRANSFER REGISTRATION

L3000-A03-ENG
22
16. CONTROL REGISTER
The instructions in this Register are provided pursuant
of the legal provisions known at equipment market
introduction (or sale) date.
New safety regulations may be introduced after the
equipment is put into operations. These could change the
user's responsibilities. Thus, despite the content of this
Register, the user should also meet the new regulations.
The tables in this Register have been prepared to record
the following events that concern machine working life:
• Equipment identication data.
• Equipment delivery to the rst owner.
• Transfers of ownership.
• Registration of routine maintenance operations.
• Periodic checks and relevant registration.
• Equipment part replacements.
This Control Register is an integral part of the equipment.
It must be preserved and accompany the equipment for
its entire working life until nal demolition. We suggest
you periodically photocopy the content of this Register to
preserve the registrations of inspections, service and track
troubleshooting.
16.1 IDENTIFICATION DATA
DEVICE IDENTIFICATION DATA
Manually ll out the table.
Original data are listed on the identication plate affixed to
the equipment.
Art. Year Matriculation/Lot n°
FIRST OWNER DATA
The equipment was sold to
Company: ________________________________
with registered offices in: ____________________
street name: ______________________________
According to the conditions set in the contract (or
order conrmation), with the technical, functional and
dimensional features specied in the Instructions for use
supplied with the machine.
16.2 OWNERSHIP TRANSFER REGISTRATION
1
Equipment ownership was transferred to
Company: _________________________________
with registered offices in:
_____________________________
street name: ____________________, on date:
_____________
This is to certify that upon transfer of ownership, the
technical, functional and dimensional equipment features
meet those originally foreseen as indicated in the
Instructions for use and that any variations have been
recorded in this Register.
The seller The purchaser
____________________ ______________________
(legal representative ) (legal representative)
2
Equipment ownership was transferred to
Company: _________________________________
with registered offices in:
_____________________________
street name: ____________________, on date:
_____________
This is to certify that upon transfer of ownership, the
technical, functional and dimensional equipment features
meet those originally foreseen as indicated in the
Instructions for use and that any variations have been
recorded in this Register.
The seller The purchaser
____________________ ______________________
(legal representative ) (legal representative)
OMCN S.p.A.
OMCN S.p.A.
DOCUMENT GENERIQUE DE DIVULGATION: DEMANDEZ LE LIVRET CORRESPONDANT SPECIFIQUEMENT A L’ARTICLE EN VOTRE POSSESSION. DAS IST EIN DEMONSTRATIVGESAMTDOKUMENT. BITTE FRAGEN SIE FÜR DIE ENTSPRECHENDE BEDIENUNGSANLEITUNG DES ARTIKELS IN IHREM BESITZ.
DOCUMENT GENERIQUE DE DIVULGATION: DEMANDEZ LE LIVRET CORRESPONDANT SPECIFIQUEMENT A L’ARTICLE EN VOTRE POSSESSION. DAS IST EIN DEMONSTRATIVGESAMTDOKUMENT. BITTE FRAGEN SIE FÜR DIE ENTSPRECHENDE BEDIENUNGSANLEITUNG DES ARTIKELS IN IHREM BESITZ.
OMCN S.p.A.
DOCUMENTO DIMOSTRATIVO GENERALE: RICHIEDERE IL MANUALE CORRISPONDENTE ALL’ARTICOLO IN VOSTRO POSSESSO. GENERAL DOCUMENT AS A DEMONSTRATION : REQUEST THE MANUAL SPECIFICALLY ISSUED WITH THE ARTICLE IN YOUR OWNERSHIP.