Why is my OMCN jack not lifting the rated weight?
If your OMCN jack isn't lifting the specified weight, it could be due to a dirty or damaged lowering device. Try removing the descent device, cleaning it carefully, and replacing it if necessary. Alternatively, worn-out cylinder gaskets or a dirty/damaged overload safety valve might be the cause, requiring you to send the equipment to your authorized dealer's maintenance center.
What to do if OMCN jacks lift’s arms do not stay in position?
If the lift arms of your OMCN jacks are not staying in position, it could be due to yielded cylinder gaskets or a dirty/damaged lowering device. In the case of yielded cylinder gaskets, you should send the equipment to the maintenance center of your authorized dealer. If the lowering device is dirty or damaged, remove the descent device, clean it, and replace it if damaged, handling it with care.
Why arm of OMCN jacks lifts but descends to its previous position?
If the arm of your OMCN jacks lifts with pumping action but descends to its previous position, the check valve might be dirty or damaged. Try dismounting the valve and cleaning it with compressed air, handling it with care.
What to do if OMCN Jacks arm lifts slightly with each pumping action?
If the lift arm of your OMCN jacks lifts only slightly with each pumping action, it may be because the gaskets of the pumping unit have yielded. Remove the pumping unit body that houses the gaskets and replace the gaskets. Another possible cause is a lack of oil in the tank, requiring you to send the equipment to the maintenance center of your authorized dealer.
How to fix OMCN Jacks arm if it does not reach the maximum declared height?
If the arm of your OMCN jack does not reach the maximum declared height, it could be due to no oil in the tank. In this case, you should send the jack to the maintenance center of your authorized dealer.
Guidelines for appropriate clothing and personal safety equipment for safe operation.
Procedure for raising the device, including placement and load monitoring.
Procedure for lowering the device, including arm return and pedal release.
Detailed list of all spare parts with their reference numbers and names.
Report for periodic checks, detailing operations performed and technician's verification.
General| Brand | OMCN |
|---|---|
| Model | 1120/E |
| Category | Lifting Systems |
| Language | English |
To Next Page
