L1120E1IENS002 31
PERIODIC TESTS REPORT
The purpose of this report is to record the operations carried out during the periodic check of the lift. Compi-
lation is the responsibility of the authorized personnel making the check.
TESTING AND CONTROL OPERATIONS
No oil leakage
Check on the correct working of lifting device
Check on the correct working of lowering device
Check on the correct warning of the max. valve
Check on the correct working of the support devices
Check the correct oil level
Pumping lever check up
Check for visible faults, breakages, deformation or signs of wear
Check lowering speed of the cylinder with nominal load included between the limits determined by
the law: MAX 150 mm/sec
DATE NEXT CHECK
Check correct physical and functioning state of the movement wheels
Check on the correspondence of the EC data plates with the declaration of conformity
Check on the position of the adhesive labels
Your attention is drawn to the importance of the check to be made on your
lift periodically. Periodic checks and inspections must always be
conducted by specialised OMCN S.p.A. personnel or our specifically
trained personnel.
WARNING
!
Date:
Signature:
Date:
Signature:
Date:
Signature:
Date:
Signature:
Date:
Signature:
Date:
Signature:
Date:
Signature:
Date:
Signature:
Periodical controls have the aim of ensuring good working condition and perfect efficiency for security purposes of the present machine, such
controls must be carried out and registered by personnel qualified in a specific manner to carry out the said task.
It is compulsory to carry out all of the following controls described with at least annual frequency (every 12 months), taking into account
obbligations to health and safety matters in the workplace and in the country in which the machine is being used.
Furthermore every time that exceptional events intervene that could have consequences for the security of the machine, of which for example
repairs, incidents or prolonged periods of inactivity it is still compulsory to carry out an extraordinary control.
WARNING
!
18.8.
Periodic checks
and service
registration
EN
To Next Page
Loading...
