9
Meter Function Menus
9-26
9.2.18 BAUD (Baud Rate)
Baud is used to select the baud rate for communication via the optional
RS-232 or RS-485 communications boards. The choices are 300, 600,
1200, 2400, 4800, 9600, and 19200.
MENU MIN/MAX/MENU *
BUTTON BUTTON
MAIN MENU SUB MENU DESCRIPTION
“BAUD”: BAUD RATE
“00300”
“00600”
“01200” Select baud rate for
“02400” communications via
“04800” RS-232 or RS-485
“09600”
“19200”
* Press the ‘MIN’ button to show “00300”, “00600”, “01200”, “02400”, “04800”,
“09600”, or “19200”.
Press the ‘MAX’ button to select one of the above.
Press the ‘MENU’ button to store the changes and the meter advances to
the next configuration (“SERCNF”).
The underlined item is the factory preset value.
To Next Page
Loading...
