Omega DP41-S - Page 172

20
Record your Setup Values
20-2
Reading Scale & Offset
(2-coordinate Format):
INPUT 1= __________ READ 1= __________
INPUT 2= __________ READ 2= __________
Input Configuration “IN CNF”:
INP.1=____ INP.2=____ INP.3=____ INP.4=____
INP.5=____ INP.6=____ INP.7=____
Input Scale and Offset “IN.SC.OF”:
INPUT 1: _________ READ 1: _________
INPUT 2: _________ READ 2: _________
Decimal Point “DEC PT” Position: F__F__F__F__F__F__
Count By “CNT BY”: ______
Filter Configuration “FIL.CNF”: FIL.1=___ FIL.2=___ FIL.3=___
Filter Time Constant “FIL TI”: ______
Setpoint Configuration “SP CNF”:
SPC.1=____ SPC.2=____ SPC.3=____ SPC.4=____
SPC.5=____ SPC.6=____ SPC.7=____ SPC.8=____
Alarm Configuration “AL CNF”:
ALC.1=____ ALC.2=____ ALC.3=____ ALC.4=____
ALC.5=____ ALC.6=____ ALC.7=____ ALC.8=____
Alarm Function “AL FNC”:
ALF.1=____ ALF.2=____ ALF.3=____ ALF.4=____
Alarm Number of Readings “AL RDG”: ____ ____
Setpoints Deadband “SP DB”: ______
Alarms 1 & 2 Deadband “AL DB”: ______
Output Configuration “OUT.CNF”:
OUT.1=____ OUT.2=____ OUT.3=____ OUT.4=____
OUT.5=____ OUT.6=____ OUT.7=____ OUT.8=____