8-8
STRAIN
0
8
Scaling to
Display
Engineering
Units
MENU SUBMENU 1 SUBMENU 2 DESCRIPTION
L1CNF Skip past
L2CNF Skip past
L3CNF Skip past
L4CNF Skip past
INPUT BRIDGE Meter’s input
RDG.CNF RDG.1=0 2-point scaling IN.SC.OF
RDG.2=0 Active decimal point
RDG.3=0 Normal display brightness
RDG.4=1 Leading zeros suppressed
RDG.5= Disregard not used
RDG.6= Disregard not used
RDG.7=0 External hard reset vs
peak reset
RDG SC 1.00000 Preset for IN.SC.OF
RDG OF 0000000 Preset for IN.SC.OF
IN CNF INP.1=0 60 Hz ac power
INP.2=0 Slow reading
(S2A jumper omitted)
INP.3=0 Unipolar input
(S2B jumper omitted)
INP.4=0 Std, for current inputs
INP.5= Disregard not used
INP.6=0 Disables IN.SC.OF
INP.7=1 Ratiometric input
IN.SC.OF Skip past
DEC PT FFFFFF No decimal point for
calibration run
(Desired decimal point
will be entered later)
CNT BY Press ‘RESET’ two times to
get return to the run mode
To Next Page
Loading...
