Omega DPi8 User Manual

TEMPERATURE UNIT SUBMENU:
Press
d
8) Display flashes previous Temperature Unit selection.
Press
b
9) Scroll though the available selections to the Temperature Unit
of your choice:
°F
or
°C
.
Press
d
10) Display shows
STRD
stored message momentarily and then
advances to
FLTR
Filter Constant.
FILTER CONSTANT SUBMENU:
Press
d
11) Display flashes previous selection for Filter Constant.
Press
b
12) Scroll though the available selections:
0001
,
0002
,
0004
,
0008
,
0016
,
0032
,
0064
,
0128
Press
d
13) Display shows
STRD
stored message momentarily only, if
change were made, otherwise press
a
to advance to the next
menu.
If Process was selected in the Input Type Menu the display will
advance to
IN.RD
Input/Reading Submenu, otherwise the
display advances to the
ALR1
Alarm 1 Menu.
The Filter Constant Submenu allows the user to specify the
number of readings stored in the Digital Averaging Filter. A filter
value of 2 is approximately equal to 1 second RC low pass time
constant.
22

Omega DPi8 Specifications

General

Brand	Omega
Model	DPi8
Category	Temperature Controller
Language	English