Omega DPi8 User Manual

32
3.2.10 ID Code Menu
Figure 3.9 Flow Chart for ID Code Menu
ENTER ID CODE MENU:
Press
a
1) Press
a
, if necessary, until
CNFG
prompt appears.
Press d 2) Display advances to
INPT
Input Menu.
Press
a
3) Press
a
, if necessary, until display advances to
ID
ID Code
Menu.
ENTERING OR CHANGING YOUR (NON-DEFAULT) ID CODE:
Press d 4) Display advances to
____
with 1
st
under score flashing.
Press
b
&
c
5) Press
b
and
c
to enter your 4-digit “ID Code” number.
Press d 6) Display advances to
CH.ID
Change ID Code Submenu.
If entered “ID Code” is incorrect display shows
ERRo
Error
message momentarily and then skips to the Run Mode.
Press
d
7) Display flashes the first digit of previous entered “ID Code”
number.
Press
b
&
c
8) Press
b
and
c
buttons to enter your new “ID Code” number.
Press
d
9) Display shows
STRD
stored message momentarily and then
advances to the
FULL
Full Security Submenu.

Omega DPi8 Specifications

General

Brand	Omega
Model	DPi8
Category	Temperature Controller
Language	English