39
Declaration of Conformity
7 Declaration of Conformity
OMICRON electronics GmbH, Oberes Ried 1, 6833 Klaus / Austria
herewith declares conformity of the CP CR500 unit with the following normative
documents of the EU:
• 73/23/EEC concerning electrical devices for use of certain voltage limits with
changes due to the CE designation standard 93/68/EEC
• 89/336/EEC about electromagnetic compatibility changed by the standard of
the Council from the 29th of April 1991 (91/263/EEC), the standard of the
Council from the 28th of April 1992 (92/31/EEC), the standard of the Council
from the 22nd of July 1993 (93/68/EEC)
and full compliance to the following standards:
• EN61010-1/A2:1995*
• EN61326-1:1997, EN61000-3-2/3
The following technical documentation is ready to be looked at:
TYPE TEST CERTIFICATE from OMICRON electronics GmbH This material
can be seen at OMICRON electronics GmbH.
Signature:
*The high-voltage (HV) components like HV sockets of CP TD1 and CP CR500, the hot end of the
HV cable and the HV clamps have some live parts during testing. These components in combination
with CPC 100 are designed to operate according the standards EN 50191 and VDE 104. The user
has to take care of components that can have live wires by following the safety instructions.
Understanding and fulfilling of all safety instructions mentioned in the CPC 100 User Manual or in
the CP CR500 User Manual consequently have to be realized by the operator.
Name: Dipl.-Ing. Dr. techn. Michael Krüger
Function: Product Manager
Date: xx. xxxx 2006
To Next Page
Loading...
Need help?
General
