5
Using this Manual
1 Using this Manual
The purpose of this user manual is to get you quickly started with the CP CR500.
The user manual guides you through the process of measuring Dissipation
Factor / Tangent Delta at large generators and motors with the test system
CP TD1.
Reading the CP CR500 User Manual alone does not release you from the duty
of complying with all national and international safety regulations relevant to
working with CPC 100, CP TD1 and CP CR500. The regulation EN 50191 "The
Erection and Operation of Electrical Test Equipment" as well as the applicable
regulations for accident prevention in the country and at the site of operation has
to be met.
1.1 Related Documents
The following documents complete the information covered by the CP CR500
User Manual:
1.2 Designated Use
The CP CR500 is designated for compensating large capacities to enable
measurements at large generators and motors with the test system CP TD1. It
must only be used for applications described in this user manual.
Title Desciption
CPC 100 User Manual Contains information on how to use CPC 100 +
CP TD1.
CP TD1 Reference Manual Contains detailed information on the underlying
measurements methods.
To Next Page
Loading...
Need help?
General
