Introduction
The ILE Variable Frequency Control inverter for squirrel cage motors utilises state of the art
electronics, to control an AC Induction Motor's speed and torque. In the lift application there is
no need for a speed feedback element up to 1.0 m/s.
The system enhances single speed lifts with variable speed performance for new and existing
lifts, whilst decreasing wasteful heat loss within the motor typical of Variable Voltage Thyristor
Controlled regulator systems.
This manual will hopefully give a summarised version of the Omron control options and assist in
setting up.
Further, more detailed information is available in the Omron 3G3FV programming and
installation manual. We suggest that, for a first time user, this information is studied.
SECTION B
To Next Page
Loading...
