Using Digital Operator
9
Example of Multi-function Display
Frequency
reference
DC bus
voltage
Monitor
data
Complete
Key sequence Indicator Display Explanation
Power ON
Press the Mode Key repeatedly until the MNTR indicator is
lit.
U01 will be displayed.
Use the Increment or Decrement Key to select the monitor
item to be displayed.
Press the Enter Key so that the data of the selected monitor
item will be displayed.
The monitor number display will appear again by pressing
the Mode Key.
Status Monitor
Item Display Display
unit
Function
U01 Frequency reference Hz Monitors the frequency reference. (Same as FREF)
U02 Output frequency Hz Monitors the output frequency. (Same as FOUT)
U03 Output current A Monitors the output current. (Same as IOUT)
U04 Output voltage V Monitors the internal output voltage reference value of the Inverter.
U05 DC bus voltage V Monitors the DC voltage of the internal main circuit of the Inverter.
U06 Input terminal status ---
Shows the ON/OFF status of inputs.
: Input ON : No input
Not
used
Terminal S1: Forward/Stop
Terminal S2: Multi-function input 1 (S2)
Terminal S3: Multi-function input 2 (S3)
Terminal S4: Multi-function input 3 (S4)
Terminal S5: Multi-function input 4 (S5)
U07 Output terminal ---
Shows the ON/OFF status of outputs.
To Next Page
Loading...
