Omron 3G3RX-V1 Series User Manual

7．Connection Procedure
2
When you turn ON the power
supply, the display shows data
as shown on the right.
Set the parameters by using the
procedure on the right.
[A001] Frequency Reference
Selection 1: 05
[A002] RUN Command
Selection 1: 05
*Set 05 (Option 2).
00.00
a001
a002
05
a001
a002
02
a005
a002
Press the Increment Key three times.
Press the En
ter Key.
Press the Increment Key once.
Parameter A002 is displayed.
The parameter is displayed again.
Press the Enter Key.
The data is changed to 05.
The default data is displayed.
The pa
rameter is displayed again.
Press the Enter Key.
The data is changed to 05.
Press the Increment Key three times.
The default da
ta is displayed.
Press the Enter Key.
Press the Mode Key three times.
Parameter A001 is displayed.
(By default, the display shows the data of
d001 (Output Frequency Monitor).)
A
fter turning ON the power
supply, the display shows data.
16

Omron 3G3RX-V1 Series Specifications

General

Brand	Omron
Model	3G3RX-V1 Series
Category	Inverter
Language	English