13
Precautions for Safe Use
DriveProgramming User’s Manual (I622-E1)
Precautions for Safe Use
• If the clock command is used in DriveProgramming, an unexpected operation may occur due to weak
battery. Take measures such as detecting a weak battery by [E042]RTC Error and stopping the
inverter or programs. When the LCD Operator is removed or disconnected, DriveProgramming is in a
waiting status by the clock command.
• When using DriveProgramming, confirm that the program data is downloaded normally before start-
ing operation.
Operation and Adjustment
To Next Page
Loading...
Need help?
General