4 DriveProgramming Editor
4 - 14
DriveProgramming User’s Manual (I622-E1)
The Block Parameters window allows you to edit DriveProgramming user parameters which act as vari-
ables of the program. The displayed parameters are organized in categories.
The Block Parameters is displayed when the DriveProgramming Editor is started. You can also show or
hide it by clicking [DriveProgramming] - [Block Parameters] in the [View] Menu.
The Block Parameters window is displayed by default at the right side of the CX-Drive.
You can separate the window by double-clicking the title bar (wide frame of the window).
To change the value of a parameter, place the cursor at its row and click on the edition box to the right
of its number. Enter the new value. A warning will be displayed if the entered value exceeds the valid
range.
At the lower part of the window, a help text for the user parameters is displayed.
4-2-5 Block Parameters Window
To Next Page
Loading...
