29
appears
The pulse rate is not
detected correctly.
Apply the arm cuff correctly,
then take another
measurement. Refer to sub-
section 2.3.
Remain still and sit correctly
during a measurement.
If the “ ” symbol
continues to appear, we
recommend you to consult
with your physician.
/
appears
does not flash during
a measurement
appears
The monitor has
malfunctioned.
Press the [START/STOP]
button again. If “Er” still
appears, contact your
Telehealth service provider
or contact OMRON at
1-800-634-4350.
appears
The monitor cannot connect
to a Telehealth service
receiver or transmit data
correctly.
Follow the provider's
instructions. If the “Err”
symbol still appears after
checking the receiver,
contact your Telehealth
service provider or
contact OMRON at
1-800-634-4350.
Display/Problem Possible Cause Solution
To Next Page
Loading...
