Omron CJ2M-CPU Series Connection Guide

9
．
Program
53
No. Outline Description
2.3. Normal/error
detection processing
Detects a normal end or an error end of the result of
send/receive processing.
It is considered as a normal end when all the following
conditions are satisfied.
・Normal end of CMND instruction (No CMND instruction
error)
(Condition of ''No communication error'' is included in (1).)
・Normal messages received from Destination Device
(No Destination Device error)
If any of the errors are detected under the conditions above,
a corresponding error flag turns ON.

Omron CJ2M-CPU Series Specifications

General

Power Supply	24 VDC
Number of Instructions	Over 400 instructions
Model	CJ2M-CPU11, CJ2M-CPU12, CJ2M-CPU13, CJ2M-CPU14, CJ2M-CPU15
Program Capacity	5K steps to 60K steps
I/O Capacity	Up to 2, 560 points
Communication Ports	Ethernet, USB, RS-232C
Execution Time	0.04 µs per basic instruction
Operating Temperature	0 to 55°C
Position Control	Supported
High-speed Counter	100 kHz max.
Pulse Output	100 kHz max.
Maximum Units	40 units
Storage Temperature	-20 to 75°C
Interrupt Inputs	Supported