Omron CJ2M-CPU Series Connection Guide

9
．
Program
55
●4.Error end state management
No. Outline Description
4.1. Error end processing Turns ON the error end flag if it is detected in 2.3.
Normal/error detection processing that the send/receive
processing ends in an error.
4.2. Response code
setting
Sets the response code corresponding to the error in the
response code storage area when an error occurs.
Additional Information
Refer to 9.7 Error Processing in this document for details on the response codes.

Omron CJ2M-CPU Series Specifications

General

Power Supply	24 VDC
Number of Instructions	Over 400 instructions
Model	CJ2M-CPU11, CJ2M-CPU12, CJ2M-CPU13, CJ2M-CPU14, CJ2M-CPU15
Program Capacity	5K steps to 60K steps
I/O Capacity	Up to 2, 560 points
Communication Ports	Ethernet, USB, RS-232C
Execution Time	0.04 µs per basic instruction
Operating Temperature	0 to 55°C
Position Control	Supported
High-speed Counter	100 kHz max.
Pulse Output	100 kHz max.
Maximum Units	40 units
Storage Temperature	-20 to 75°C
Interrupt Inputs	Supported