Omron CK5M-CPU 1 Series Connection Guide

A-1
Saving and Reading the Project
This appendix describes the procedure to save the Power PMAC IDE project to the computer for the
purpose of reuse.
A-1-1
Saving the Project
1
Saving the Project
Select Save All from the File menu to
save the project to the computer
.
A-1-2
Reading and Downloading the Project
1
Start up and connect Power PMAC IDE
to the Controller.
2
Execute the $$$***
command from the
T
erminal to revert the PMAC to the fac-
tory default settings.
3
From the File menu, select Open –
Project/Solution to read the saved
project.
Appendices
A-2
CK3E/CK3M/CK5M Series EtherNet/IP Connection Guide (O903)

Omron CK5M-CPU 1 Series Specifications

General

Brand	Omron
Model	CK5M-CPU 1 Series
Category	Controller
Language	English