xi
About this Manual:
This manual describes the installation and operation of the CS1W-AD041-V1, CS1W-AD081-V1,
CS1W-AD161, CJ1W-AD041-V1, and CJ1W-AD081-V1 Analog Input Units; the CS1W-DA041, CS1W-
DA08V, CS1W-DA08C, CJ1W-DA021, CJ1W-DA041, CJ1W-DA08V, and CJ1W-DA08C Analog Output
Units; and the CS1W-MAD44 and CJ1W-MAD42 Analog I/O Units. This manual includes the sections
described below.
The input function of CS/CJ-series Analog I/O Units converts analog sensor output to the digital format
and transmits it to CS/CJ-series PLCs. The output function converts digital data from the PLC to the
analog format for output.
Please read this manual and the other manuals related to the CS/CJ-series Analog I/O Units carefully
and be sure you understand the information provided before attempting to install and operate the
Units. The manuals used with the CS/CJ-series Analog I/O Units are listed in the following table. The
suffixes have been omitted from the catalog numbers. Be sure you are using the most recent version
for your area.
Name Cat. No. Contents
SYSMAC CS-series
CS1G/H-CPU@@-EV1, CS1G/H-CPU@@H
Programmable Controllers Operation Manual
W339 Describes the installation and operation
of the CS-series PLCs.
SYSMAC CS Series
CS1D-CPU@@H CPU Units, CS1D-CPU@@S CPU Units,
CS1D-DPL01 Duplex Unit, CS1D-PA/PD@@@ Power
Supply Unit
CS1D Duplex System Operation Manual
W405 Provides an outline of and describes the
design, installation, maintenance, and
other basic operations for a Duplex Sys-
tem based on CS1D CPU Units.
SYSMAC CJ-series
CJ1G-CPU@@, CJ1G/H-CPU@@H, CJ1M-CPU@@
Programmable Controllers Operation Manual
W393 Describes the installation and operation
of the CJ-series PLCs.
SYSMAC CS/CJ-series
CS1G/H-CPU@@-EV1, CS1G/H-CPU@@H, CJ1G-
CPU@@, CJ1G/H-CPU@@H, CJ1M-CPU@@
Programmable Controllers Programming Manual
W394 Describes the programming methods
required to use the functions of the CS/
CJ-series PLCs.
SYSMAC CS/CJ-series
CS1G/H-CPU@@-EV1, CS1G/H-CPU@@H, CJ1G-
CPU@@, CJ1G/H-CPU@@H, CJ1M-CPU@@
Programmable Controllers Instructions Reference Manual
W340 Describes the ladder diagram program-
ming instructions supported by CS/CJ-
series PLCs.
SYSMAC WS02-CXPC1-EV50
CX-Programmer Ver. 5.0 Operation Manual
W437 Provides information on how to use the
CX-Programmer, a programming device
that supports the CS/CJ-series PLCs.
SYSMAC CS/CJ-series
CQM1H-PRO01-E, CQM1-PRO01-E, C200H-PRO27-E
Programming Consoles Operation Manual
W341 Provides information on how to program
and operate CS/CJ-series PLCs using a
Programming Console.