243
Advanced Function Setting Level Section 5-8
• This parameter switches the characters to be displayed.
The following two types of characters can be displayed.
11-segment display
7-segment display
When set to on, an 11-segment display is used.
• Set the soak time unit for the simple program function.
■ Related Parameters
Program start, Soak time remain (operation level): Page 171
Soak time, Wait band (adjustment level): Page 191
Program pattern (initial setting level): Page 205
csel Character Select
Setting range Default
on: 11-segment display, off: 7-segment display on
Function
Setting
t-u Soak Time Unit
The Program Pattern parameter
must not be set to OFF.
Setting range Default
m: Minutes, h: Hours m
Function
Setting
See
See
To Next Page
Loading...
