Omron E5AN

289
Appendix
Adjustment Level
Parameters Characters Setting (monitor) value Display Default Unit Set value
Adjustment Level
Display
l.adj
AT Execute/Cancel at OFF, AT Cancel
AT-2: 100%AT Execute
AT-1: 40%AT Execute
off,
at-2,
at-1
OFF None
Communications
Writing
cmwt OFF, ON off, on OFF None
Heater Current 1
Value Monitor
ct1 0.0 to 55.0 A
Heater Burnout
Detection 1
hb1 0.0 to 50.0 0.0 A
Heater Overcurrent
Detection 1
oc1 0.0 to 50.0 50.0 A
Heater Current 2
Value Monitor
ct2 0.0 to 55.0 A
Heater Burnout
Detection 2
hb2 0.0 to 50.0 0.0 A
Heater Overcurrent
Detection 2
oc2 0.0 to 50.0 50.0 A
Leakage Current 1
Monitor
lcr1 0.0 to 55.0 A
HS Alarm 1 hs1 0.0 to 50.0 50.0 A
Leakage Current 2
Monitor
lcr2 0.0 to 55.0 A
HS Alarm 2 hs2 0.0 to 50.0 50.0 A
SP 0 sp-0 SP lower limit to SP upper
limit
0EU
SP 1 sp-1 SP lower limit to SP upper
limit
0EU
SP 2 sp-2 SP lower limit to SP upper
limit
0EU
SP 3 sp-3 SP lower limit to SP upper
limit
0EU
Temperature Input
Shift
ins −199.9 to 999.9 0.0 °C or °F
Upper Limit Temper-
ature Input Shift
Value
insh −199.9 to 999.9 0.0 °C or °F
Lower Limit Temper-
ature Input Shift
Value
insl −199.9 to 999.9 0.0 °C or °F
Proportional Band p Universal input: 0.1 to 999.9 8.0 °C or °F
(See note
1.)
Analog input: 0.1 to 999.9 10.0 %FS
Integral Time i 0 to 3,999 233 Second
Derivative Time d RT OFF: 0 to 3,999 40 Second
RT ON: 0.0 to 999.9 40.0 Second
Cooling Coefficient c-sc 0.01 to 99.99 1.00 None
Dead Band c-db Universal input: −199.9 to
999.9
0.0 °C or °F
(See note
1.)
Analog input: −19.99 to 99.99 0.00 %FS