Omron E5CC Quick Start Guide

Page 19 of 37
Figure 18: CX-Thermo Workspace
Next, change any parameters on the controller.
Right click on a controller part number to copy the device and adjust the copy destination. This automatically changes
status to working offline.
Figure 19: Copy Device Configuration
Click the icon to work online. Confirm that the devices were connected.

Omron E5CC Specifications

General

Number of Display Digits	4 digits
Number of Control Outputs	1
Control Method	ON/OFF
Input Type	Thermocouple, RTD, Analog voltage, Analog current
Supply Voltage	100 to 240 VAC
Output Type	Relay, Voltage, Current
Display Type	LCD
Size	48 x 48 mm
Mounting Method	Panel mount
Control Output	Relay, Voltage, Current
Alarm Output	Relay
Communication	RS-485
Ambient Operating Temperature	-10 to 55°C
Ambient Operating Humidity	25% to 85% RH
Protection Rating	IP66