Omron E5CK-T User Manual

E5CK-T E5CK-T
187
J LEVEL 1 MODE
AT Execute/Cancel
Proportional Band
Available if the Controller is in advanced PID control.
Integral Time
Available if the Controller is in advanced PID control.
Derivative Time
Available if the Controller is in advanced PID control.
For heating/cooling control
For models E5AK/EK-T only
Cooling Coefficient
Used with the Controller is in
heating and cooling control.
Dead Band
Used with the Controller is in
heating and cooling control.
Manual Reset Value
Available when the integral time parameter
of the Controller in standard control is “0.”
Hysteresis (Heat)
Available when the Controller is in
ON/OFF control.
For heating/cooling control
Hysteresis (Cool)
Available when the Controller is in
ON/OFF control.
Control Period (Heat)
Available when the Controller has a relay or
voltage output, or is in advanced PID control.
For heating/cooling control
Control Period (Cool)
Available when the Controller has a relay
or voltage output, or is in advanced PID
control.
Current value
Heater Current Monitor
Available when the heater burnout alarm is
assigned. For models E5AK-T/E5EK-T only.
Heater Burnout Detection
Available when the heater burnout alarm is
assigned. For models E5AK-T/E5EK-T only.
Position-
proportional
dead band

Omron E5CK-T Specifications

General

Brand	Omron
Model	E5CK-T
Category	Controller
Language	English