Omron E5EC Communications Manual

5 - 5
5 Communications Data for Modbus
E5@C Digital Temperature Controllers Communications Manual (H175)
5-1 Variable Area (Setting Range) List
5
*1 You can use this parameter only with the E5EC-PR@-8@@ or E5AC-PR@-8@@. (The Digital Controller must be
manufactured in August 2014 or later (version 2.2 or higher).)
074A 2725 Heater Burnout Detection
2
H'00000000 to H'000001F4 (0.0 to 50.0) Adjustment
074C 2726 Leakage Current 2
Monitor
H'00000000 to H'00000226 (0.0 to 55.0) Operation
074E 2727 HS Alarm 2 H'00000000 to H'000001F4 (0.0 to 50.0) Adjustment
0750 2728 Soak Time Remain H'00000000 to H'0000270F (0 to 9999) Operation
0752 2729 Soak Time H'00000001 to H'0000270F (1 to 9999) Adjustment
0754 272A Wait Band H'00000000 (0): OFF
H'00000001 to H'0000270F
(0.1 to 999.9 for Temperature input)
(0.01 to 99.99 for Analog input)
0756 272B Remote SP Input Shift H'FFFFF831 to H'0000270F (−1999 to 9999)
0758 272C Remote SP input Slope
Coefficient
H'00000001 to H'0000270F (0.001 to 9.999)
0800 2800 Input Digital Filter H'00000000 to H'0000270F (0.0 to 999.9) Advanced
function
setting
0808 2804 Moving Average Count H'00000000 (0): OFF
H'00000001 (1): 2 times
H'00000002 (2): 4 times
H'00000003 (3): 8 times
H'00000004 (4): 16 times
H'00000005 (5): 32 times
081A 280D FB Moving Average
Count
*1
H'00000000 (0): OFF
H'00000001 (1): 2 times
H'00000002 (2): 4 times
H'00000003 (3): 8 times
H'00000004 (4): 16 times
H'00000005 (5): 32 times
Address
Parameter name Setting (monitor) value Level
Four-byte
mode
Two-byte
mode

Omron E5EC Specifications

General

Brand	Omron
Model	E5EC
Category	Temperature Controller
Language	English