Omron E5EC Communications Manual

6 - 81
6 Programless Communications
E5@C Digital Temperature Controllers Communications Manual (H175)
6-10 Connecting to MELSEC iQ-R-series PLCs
6
6-10-4 E5@C Controller Setup
(5) The following dialog box will be displayed. Click the Close Button after the process
ends.
(Messages will be displayed during the process, but just click the OK Button.)
(6) Open the front cover on the CPU Module and set the switch in the middle to RESET.
When the CPU Module indicators go out, return the switch to the original position.
You can now use communications.
Set up programless communications. Perform the procedure that is given in 6-4-4 E5
@ C Controller
Setup.
6-10-4 E5@C Controller Setup

Omron E5EC Specifications

General

Mounting Type	Panel Mount
Display Resolution	0.1°C or 1°C
Control Method	ON/OFF
Input Type	Thermocouple, RTD, Analog voltage
Supply Voltage	100 to 240 VAC
Output Type	Relay, Voltage, Current
Size	48 x 96 mm
Control Output	Relay, Voltage, Current
Alarm Output	Relay
Communication	RS-485
Ambient Operating Temperature	-10 to 55°C
Ambient Operating Humidity	25 to 85% RH
Protection Rating	IP20