Omron E5EC

6 - 37
6 Programless Communications
E5@C Digital Temperature Controllers Communications Manual (H175)
6-5 Connecting to CJ-series PLCs
6
6-5-4 E5@C Controller Setup
Click the Yes Button to restart the Unit. Select All ports and then click the OK Button.
A dialog box will be displayed when the Unit has been restarted. Click the OK Button. This
completes the PLC setup procedure. You will use the CX-Programmer to check operation,
so leave it online.
Set up programless communications. Perform the procedure that is given in 6-4-4 E5 @ C Controller
Setup.
Perform the procedure that is given in 6-4-5 Checking Operation.
6-5-4 E5@C Controller Setup
6-5-5 Checking Operation