Omron E5EC Communications Manual

6 Programless Communications
6 - 36
E5@C Digital Temperature Controllers Communications Manual (H175)
(4) We will change the communications settings for port 1.
Set Port 1: Port settings to User settings, set Port 1: Baud rate to 57600 bps, and then click
the Transfer [PC to Unit] Button. Use the defaults settings for the other parameters.
Note: If you change the unit number, refer to 6-2-7 Communications Node Number.
Click the Yes Button. The settings will be transferred. After the data has been transferred,
click the OK Button.

Omron E5EC Specifications

General

Mounting Type	Panel Mount
Display Resolution	0.1°C or 1°C
Control Method	ON/OFF
Input Type	Thermocouple, RTD, Analog voltage
Supply Voltage	100 to 240 VAC
Output Type	Relay, Voltage, Current
Size	48 x 96 mm
Control Output	Relay, Voltage, Current
Alarm Output	Relay
Communication	RS-485
Ambient Operating Temperature	-10 to 55°C
Ambient Operating Humidity	25 to 85% RH
Protection Rating	IP20