Omron E5EC

6 - 61
6 Programless Communications
E5@C Digital Temperature Controllers Communications Manual (H175)
6-8 Connecting to MELSEC Q-series PLCs
6
6-8-5 Checking Operation
The SP and RUN/STOP status of the E5@C Controllers will be changed to check operation. Make sure
that this will not create any problems in the controlled system.
 Checking E5CC Monitor Values
(1) We will display PLC memory in a dialog box.
Select Online
− Monitor − Device/Buffer Memory Batch Monitor.
(2) We will monitor PLC memory in a dialog box.
Enter D0 for in the Device Name Box and press the Enter Key on the computer’s keyboard.
Monitoring of D0 will be started.
6-8-5 Checking Operation