Omron E5EC Communications Manual

3 Communications Data for CompoWay/F
3 - 10
E5@C Digital Temperature Controllers Communications Manual (H175)
*1 After communications parameters have been changed, reset the Digital Controller to enable them.
Note: The alarm function can also be used in Digital Temperature Controllers that do not have any auxiliary
outputs. In this case, confirm alarm occurrences via the status data.
C3 (83) 0010 Communications
Unit No.
*1
H'00000000 to H'00000063 (0 to 99) Commu
nications
setting
C3 (83) 0011 Communications
Baud Rate
*1
H'00000003 (3): 9.6
H'00000004 (4): 19.2
H'00000005 (5): 38.4
H'00000006 (6): 57.6
C3 (83) 0012 Communications
Data Length
*1
H'00000007 (7): 7
H'00000008 (8): 8
C3 (83) 0013 Communications
Stop Bits
*1
H'00000001 (1): 1
H'00000002 (2): 2
C3 (83) 0014 Communications
Parity
*1
H'00000000 (0): None
H'00000001 (1): Even
H'00000002 (2): Odd
Variable
type
Address
Parameter
name
Setting (monitor) value Level

Omron E5EC Specifications

General

Mounting Type	Panel Mount
Display Resolution	0.1°C or 1°C
Control Method	ON/OFF
Input Type	Thermocouple, RTD, Analog voltage
Supply Voltage	100 to 240 VAC
Output Type	Relay, Voltage, Current
Size	48 x 96 mm
Control Output	Relay, Voltage, Current
Alarm Output	Relay
Communication	RS-485
Ambient Operating Temperature	-10 to 55°C
Ambient Operating Humidity	25 to 85% RH
Protection Rating	IP20