x
Relevant Manuals
The following table lists manuals that contain information relevant to EtherNet/IP Slave Units.
Manual
number
Model Name Contents
W481 ERT1 Series ERT1 Series
EtherNet/IP Slave
Units Operation
Manual (this manual)
Provides information on operating and installing Ether-
Net/IP Slave Units.
W465 CS1W-EIP21
CJ1W-EIP21
CJ2H-CPU6@-EIP
EtherNet/IP Units
Operation Manual
Provides information on operating and installing Ether-
Net/IP Units, including details on basic settings, tag data
links, and FINS communications.
Refer to the Communications Commands Reference
Manual (W342) for details on FINS commands that can
be sent to CS-series and CJ-series CPU Units when
using the FINS communications service.
Refer to the Ethernet Units Operation Manual
Construction of Applications (W421) for details on con-
structing host applications that use FINS communica-
tions.
W342 CS1G/H-CPU@@H
CS1G/H-CPU-@@V1
CS1W-SCU21
CS1W-SCB21/41
CJ2H-CPU6@-EIP
CJ2H-CPU6@
CJ1G/H-CPU@@H
CJ1G-CPU@@
CJ1W-SCU41
Communications
Commands Refer-
ence Manual
Describes the C-series (Host Link) and FINS communi-
cations commands used when sending communications
commands to CS-series and CJ-series CPU Units.
W463 CXONE-AL@@C-V3
CXONE-AL@@D-V3
CX-One Ver. 3.0
Setup Manual
Describes the setup procedures for the CX-One. Informa-
tion is also provided on the operating environment for the
CX-One.
!WARNING Failure to read and understand the information provided in this manual may result in per-
sonal injury or death, damage to the product, or product failure. Please read each section
in its entirety and be sure you understand the information provided in the section and
related sections before attempting any of the procedures or operations given.
To Next Page
Loading...
Need help?
General
