73
SECTION 6
Smart Functions
This section describes the Smart Functions supported by the EtherNet/IP Slave Units.
6-1 Functions Common to All Slave Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
6-1-1 Automatic Baud Rate Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
6-1-2 Hold/Clear Outputs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
6-1-3 I/O Power Status Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
6-1-4 Input Filter (Input Units Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
6-1-5 Power Short-circuit Detection (Input) . . . . . . . . . . . . . . . . . . . . . . . 76
6-1-6 Load Short-circuit Detection (Output) . . . . . . . . . . . . . . . . . . . . . . . 76
To Next Page
Loading...
