Omron G5 Series Startup Guide

40
10
Saving the downloaded settings
and programs
After the download process is
complete and you make sure
that there are no errors in the
Output Window, run the save
command from the Terminal tab
page.
* The save command stores the
downloaded project in the
Controller. This operation saves
the settings to be executed
automatically when the power to
the Controller is turned on.
11
Restarting after download
Run the following command
from the Terminal tab page to
restart the Controller with the
downloaded project.
$$$

Omron G5 Series Specifications

General

Feedback	Incremental Encoder, Absolute Encoder
Communication	EtherCAT
Safety Function	STO (Safe Torque Off)
Protection Functions	Overvoltage, Undervoltage, Overcurrent
Vibration Resistance	4.9 m/s² (10 to 55 Hz)