Omron HBF-702T - User Manual

Questions and Answers:

D
David GonzalezAug 21, 2025
Why are the Omron Measuring Instruments results too high or low?
- A
  Adam McguireAug 21, 2025
  Inaccurate readings from the Omron Measuring Instruments can stem from several factors. Ensure you maintain correct posture during measurement and place the unit on a hard, level surface, avoiding carpets or uneven flooring. Poor blood circulation due to cold feet or a cold body can also affect results, so warm yourself beforehand. If the electrodes are too cold, allow the unit to warm up in a room before use. For dry skin, slightly moisten your palms and soles. Lastly, ensure the '0 kg correction' is properly implemented.
N
nancylopezSep 3, 2025
What to do if palms or soles are not in contact with electrodes on Omron Measuring Instruments?
- P
  Patricia HuynhSep 3, 2025
  If your palms or soles are not making firm contact with the electrodes on your Omron Measuring Instruments, press them firmly against the electrodes during measurement. If the power is off, simply step on the unit to take a weight measurement directly. Ensure you maintain correct posture during the measurement.
N
Nicole Savage MDSep 1, 2025
What happens if I step off Omron Measuring Instruments during body composition measurement?
- M
  Marie LawrenceSep 1, 2025
  If you step off the Omron Measuring Instruments during a body composition measurement, do not step off the unit until the measurement is completed.
S
Sarah KaiserAug 31, 2025
What to do if palms or soles are too dry for Omron Measuring Instruments measurement?
- F
  fbarnesAug 31, 2025
  If your palms or soles are too dry when using the Omron Measuring Instruments, moisten them slightly with a wet towel before repeating the measurement.
L
Lisa KellerAug 29, 2025
What to do if I moved during measurement with Omron Measuring Instruments?
- K
  Kimberly JohnsonAug 29, 2025
  If you moved during the measurement with your Omron Measuring Instruments, ensure that you remain still during the process. Also, this unit is designed for body weights under 135 kg.
V
vicki36Aug 28, 2025
Why are only weight and BMI displayed on my Omron Measuring Instruments?
- S
  sharon80Aug 28, 2025
  If your Omron Measuring Instruments only shows weight and BMI, it could be due to a few reasons. Users under 10 years old can only measure weight and BMI. Also, visceral fat level and body age cannot be measured for users under 18 years old. Lastly, incorrect registered data can cause this issue. To resolve this, verify the accuracy of the birth date settings. If needed, remove the batteries for at least 20 seconds, then reinsert them and reset the initial settings.
J
jonespatriciaAug 27, 2025
How to fix low battery on Omron Measuring Instruments?
- A
  Aaron ThompsonAug 27, 2025
  When the batteries are low on your Omron Measuring Instruments, it's recommended to replace them with new ones as soon as possible.
J
James ChenAug 25, 2025
What to do if nothing is displayed on my Omron Measuring Instruments?
- C
  carlosfitzgeraldAug 25, 2025
  If your Omron Measuring Instruments display is blank, there could be a few reasons. First, check that the batteries are correctly inserted with the right polarities. If the batteries are old, replace all four with new ones. Finally, ensure you've completed the initial setting after replacing the batteries.
D
Donna RiveraAug 23, 2025
Why can't body composition be measured after weight on Omron Measuring Instruments?
- J
  jeffrey14Aug 23, 2025
  If your Omron Measuring Instruments completes the weight measurement but fails to measure body composition, it might be because you stepped on the unit when it was turned off. Press the power switch and wait until '0.0 kg' appears before stepping on. Alternatively, the unit might be in 'Measure weight only' mode. Ensure you select a personal number or 'GUEST' before taking the measurement.

Omron HBF-702T Specifications

General

Type	Body Composition Monitor
Measurement Method	Bioelectrical Impedance Analysis (BIA)
Weight Increment	0.1 kg (0.2 lb)
Connectivity	Bluetooth
Display	LCD
Warranty	1 year
Body Fat Measurement Range	5.0 - 60.0 %
Visceral Fat Level	1 - 30
Power Source	4 AAA batteries
Skeletal Muscle Percentage	5.0 - 40.0 %