Omron LD-60 - Software Installation; Setup; Enabling Acuity

Chapter 6: Acuity Localization
A
B
C
D
Figure 6-10 (A) Filter, (B) Foam Seal, (C) Tube, and (D) Completed Assembly
Software Installation
This step only needs to be taken if you are adding Acuity localization as an upgrade to an
existing system.
Install the Acuity supporting libraries first. This package will either be supplied with the Acu-
ity order, or it can be obtained through our applications engineering staff. Refer to SetNetGo -
Managing Software Packages on page 26.
6.4 Setup
Enabling Acuity
In MobilePlanner
13732-000 Rev J LDPlatform Peripherals Guide 99