132 LDî ±Platform Peripherals Guide 13732-000 Rev J
9.3 î ±Sensor Installation on the LD-60, LD-90, and LD-xxxCT
239.8
(9.44)
139.5
(5.49)
C
L
A
B
C
D
E
F
Figure 9-1 Mounting Positions for Brackets and Sensors (units are mm (inches))
Key Meaning Key Meaning
A Axle D Mounting Hardware (Screw and Washers) x2 or x4, Removed from
Drive Units and then Re-installed
B Rear Sensor E Front Sensor
C Rear Sensor
Bracket
F Front Sensor Bracket
WARNING: MAGNETIC FIELD - MEDICAL IMPLANT RISK
Magnetic fields can be hazardous to medical implant wearers. Medical
Implant wearers should stay at least 30 cm (12 inches) away from the under-
side of the Platform.
Single and Dual-Sensor Installation, Part 1
1.
Remove the side covers on both sides of the platform.
2.
Remove the payload structure to expose the payload bay and the core.
The specifics of what is involved with this step depends on your payload structure.
To Next Page
Loading...
