94 LDî ±Platform Peripherals Guide 13732-000 Rev J
6.3 î ±Installation
Callout Description Callout Description
A Camera Mounting Bracket C Camera Enclosure Base
B Note: Test Bracket is Shown for
Illustration Only. To Mount to
Your Own Location, See Detail
of Base Mounting Holes.
D Screw
The screws have to be inserted from inside your payload structure, through the payload
structure surface and camera enclosure base, and into the three clinched nuts in the bot-
tom of the camera bracket.
There is a sticker on the camera bracket that shows the direction of travel of the AMR.
See the following figure. Verify that the arrow on the sticker is pointing toward the front
of the AMR.
Direction of Travel
4550 Norris Canyon Road
San Ramon, CA 94583
Model: Acuity
P/N: 13700-000
Omron
Adept Technologies, Inc.
Figure 6-5 Label on Camera Mounting Bracket
To Next Page
Loading...
