Omron NA Series Practices Guide

22
7. This message appears after
setting files generated.
Press [OK].
8. Check the generated data setting
files.
A file name contains the logging
setting number, the logging ID,
and the safety signature.
9. Create a folder named
DataLogSettingFile under the
Root directory of the USB
memory used for NA.
10. Save the data setting files to the
DataLogSettingFile folder in a
USB memory stick. Insert the
stick memory to NA.
[Sample]
Logging setting
number
Logging ID
Safety signature

Omron NA Series Specifications

General

Touch Panel	Resistive
Interfaces	USB, Ethernet, RS-232/422/485
Operating Temperature	0°C to 50°C
Power Supply	24 VDC
Protection Rating	IP65 (front panel)
Storage Temperature	-20°C to 60°C
Display Type	TFT LCD
Dimensions	Varies depending on the model
Weight	Varies depending on the model