5-4-2 Restoring
Implement a restoring procedure using the restored file that transferred in the previous section
(5-4-1).
6. Confirmation dialog window is
displayed. Press [Execute].
7. If the download is successfully
completed, press [Completed].
1. Continued from the Step 7,
5-4-1.
Confirm safety signatures, and
then, press the download button
at the bottom of the screen.
2. Start the Restore Mode.
On/ off the power switch and dip
switches of the safety CPU unit
following the instruction on the
screen.
Then, press [Next].
3. NA is standing by for a start
instruction.
Press [Next] after confirming
that the screen display is
right.
To Next Page
Loading...
