6 Maintenance and Troubleshooting
6-10
NB-series Programmable Terminals Startup Guide Manual(V109)
Use two [Multi-State Setting Component] as the Page Up/Down button, designate the button
address the same as the component for display, and set as follows in the attributes page of
[Multi-State Setting].
Note Incremental upper limit is determined by how many events the customer wants to record, while the
decremental lower limit is recommended to be set to 0.
10
Why is there one event inquiring record less
When the customer set the [Multi-State Setting component] for Page Up/Down, the lower limit is
set to 1, which will cause the records to be one less. The correct setting is as follows:
To Next Page
Loading...
