Omron NB3Q-TW00B Setup Manual

3 System Setting Mode
3-2
NB-series Programmable Terminals Setup Manual(V107)
3-1 Display Method of System Setting Mode
Enter the System Setting Mode following the procedures below.
(1) Set both the DIP switches SW1 and SW2 on the back side to ON.
(2) Press the Reset switch, restart the NB Unit, and then it enters into the System Setting
Mode.
WWW.NNC.IR

Omron NB3Q-TW00B Specifications

General

Brand	Omron
Model	NB3Q-TW00B
Category	Touch terminals
Language	English